| Disable Drag Operations
|
If on, the product disregards Data button-up actions
when the pointer is in views. A data point is entered at the pointer position
when the Data button is pressed, but a second data point is not entered when
the Data button is released. The default is off.
|
| ESC exits command
|
If on, pressing <ESC> deactivates the
selected tool and activates the Default Tool chosen in the Look and Feel
category. The default is off.
|
| Locate Tolerance
|
Sets the size of the searched area around the
pointer when searching for an element. The default is 10 pixels.
SET
LOCATE
TOLERANCE
|
| Pressing Enter Shows Keyin Browser
|
If on, pressing <Enter> shows the Key-in
window. The default is on.
|
| Pointer Size
|
Sets the size of the pointer cross hairs. Can be set
to Normal or Full View. The default is Normal.
SET
CURSOR
[
SMALL |
FULL ]
|
| Pointer Type
|
Controls the alignment of the
pointer's cross hairs:
- Orthogonal —
Traditional
"+" pointer (the default).
- Isometric — Cross
hairs are aligned with the isometric drawing plane (top, left, right, or
all).
SET
CURSOR
[
ISOMETRIC |
ORTHOGONAL ]
|
| Click Sensitivity
|
Adjusts how aggressively clicks are interpreted as
drag operations versus data points.
- Normal (the
default)
- Fast
- Slow — This is the
optimal choice for usage with tablet devices. With tablet devices, sometimes a
click is interpreted as a click and drag, which causes an extra data point to
be placed. Using this setting eliminates this problem.
- Pen — This is the
optimal choice for usage with pen input devices because the product most
aggressively interprets input as drag moves.
|
| Reset Pop-up Menu
|
Sets the Reset button action that causes the Reset
pop-up menu to appear.
- Press and Hold —
Pressing and holding the Reset button for the duration specified Hold Delay
causes the menu to appear. Clicking the Reset button enters a Reset. This is
the default.
- Click — Clicking
the Reset button causes the menu to appear.
|
| Hold Delay
|
Sets the time interval, in ticks (60ths of a
second), during which the Reset button must be pressed and held to cause the
Reset pop-up menu to appear. The default is 10 ticks (0.17 seconds).
While the Reset Pop-up Menu preference is set to
Click, the Hold Delay preference does not affect the operation of the menu, and
the Hold Delay slider control is disabled.
|
